Transaxle Shift Quality Quick Learn Procedure (Concord & Intrepid)
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 1998 Plymouth Voyager, 1998 Plymouth Neon, 1998 Plymouth Grand Voyager, 1998 Plymouth Breeze, and 1998 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Transaxle shift quality quick learn procedure must be performed to provide proper transaxle operation if any of the following have been done:
- Vehicle battery was disconnected.
- Transaxle assembly was replaced.
- Transmission Control Module (TCM) was replaced.
- Solenoid assembly was replaced.
- Valve body was reconditioned or replaced.
- Transaxle shift quality quick learn procedure must be performed using Chrysler's Diagnostic Readout Box (DRB-III) scan tool. Connect scan tool to Data Link Connector (DLC) below driver's side of instrument panel. For DLC location, see the appropriate TESTS W/CODES article in ENGINE PERFORMANCE.
- Follow scan tool manufacturer's instructions to perform transaxle shift quality quick learn procedure. Remove scan tool.