Body Control System

The body electrical systems on the 2001 AB HIGH LINE consists of two modules that communicate over the CCD bus (Chrysler Collision Detection multiplex system). There are two additional modules, the Powertrain Control Module (PCM) and the Controller Anti-Lock Brake (CAB) that are not part of the body system, but do utilize the CCD bus for communication. The CAB also utilizes the bus for diagnostics. The PCM sends and receives messages on the CCD bus, however diagnostics are performed through the Serial Communication Interface of SCI, the same as previous years. All of the information about the functioning of all the system is organized, controlled, and communicated by the CCD bus.

Through the CCD bus, information about the operation of vehicle components and circuits is relayed quickly to the appropriate module(s). All modules receive all the information transmitted on the bus even though a module may not require all the information to perform it's function. It will only respond to messages "addressed" to it through a binary coding process. This method of data transmission significantly reduces the complexity of the wiring in the vehicle and the size of wiring harnesses.