A/C Pressure Too High (Active)
NOTE:
After making any repairs, perform BODY VERIFICATION TEST under VERIFICATION TESTS.
Turn the ignition on. With the DRBIII®, read PCM/ECM DTCs. If the DRBIII® displays any PCM/ECM DTCs, refer to Powertrain Diagnostic information for the related symptom(s). See DIAGNOSTIC TESTS in SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. With the DRBIII®, reset the ATC after repair/replacement is complete. If the DRBIII® does not display any PCM/ECM DTCs, replace the ATC. See A/C-HEATER CONTROL PANEL under REMOVAL & INSTALLATION. With the DRBIII®, reset the ATC after repair/replacement is complete.