LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2002 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Body Control Modules) >> Programming >> Remote Keyless Entry Transmitter >> Programming Remote Keyless Entry Transmitter Without DRBIII(R)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Remote Keyless Entry Transmitter Without DRBIII(R)

WARNING: This page is about a different car, the 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter vehicle and close all doors. Fasten seat belt. Turn ignition on. Using a programmed RKE transmitter, press and hold RKE transmitter UNLOCK button for 4-10 seconds. While pressing UNLOCK button, press PANIC button. Release both UNLOCK and PANIC buttons. A single chime will sound to indicate RKE has entered programming mode. All transmitters that are to be programmed must be done within 30 seconds of when the chime sounds.
  2. Simultaneously press and release both LOCK and UNLOCK buttons on transmitter to be programmed. A single chime will sound. Within 4 seconds of when the chime sounds, press and release either the LOCK or UNLOCK button on the transmitter. Repeat this step to program up to 2 additional transmitters. Vehicle remains in program mode up to 30 seconds from when original chime sounded. After 30 seconds, all programmed transmitters will function normally.
scientia non olet · About LEMON Manuals