Anti-Lock Brake System Verification Test
WARNING: This page is about a different car, the 2002 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Connect all previously disconnected components and connectors. Ensure all accessories are turned off and battery is fully charged. Connect DRBIII(R) to DLC.
- Turn ignition on. Using the DRBIII(R), erase DTCs from all modules. Start engine and allow it to run for 2 minutes. Fully operate the system that was malfunctioning.
- Turn ignition off. Wait 5 seconds. Turn ignition on. Using the DRBIII(R), read DTCs from all modules. If any DTCs are present, return to DIAGNOSTIC TROUBLE CODE DEFINITIONS and diagnose new or recurring DTC. If no DTCs are present, road test vehicle for at least 5 minutes and perform several anti-lock brake stops.
- Turn ignition off. Wait 5 seconds. Turn ignition on. Using the DRBIII(R), read DTCs from all modules. Are any DTCs present or is the original condition still present? If yes, repair is not complete. See DIAGNOSTIC TROUBLE CODE DEFINITIONS or SYMPTOM IDENTIFICATION . If no, repair is complete.
CAUTION:
Ensure braking capability is available before road testing vehicle.