Powertrain Control Module Programming (Ram Pickup 2500 & 3500 - Gasoline, Ram Van & Ram Wagon)

NOTE: If replacing Powertrain Control Module (PCM), the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into PCM to prevent Diagnostic Trouble Codes (DTC) from being set in Controller Anti-Lock Brake (CAB) module and Air Bag Control Module (ACM).

Connect scan tool to Data Link Connector (DLC). DLC is located below driver's side of instrument panel. Turn ignition on. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from CAB module and ACM.