LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2003 >> Durango Base, 5.9 Z, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Electronic Control Modules) >> Controller Rear Wheel Anti-Lock Brake >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Controller Rear Wheel Anti-Lock Brake: Installation

WARNING: This page is about a different car, the 2004 Dodge Dakota and 2003 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB. For axle type refer to appropriate AXLE article. For tire revolutions per mile (Refer to TIRES (2003) or TIRES/WHEELS (2004)). To program the CAB refer to CHASSIS DIAGNOSTIC PROCEDURES (2003) or CHASSIS DIAGNOSTIC PROCEDURES (2004).
  1. Place the CAB onto the HCU.
    NOTE: Insure the CAB seal is in position before installation.
  2. Install the mounting screws and tighten to 4-4.7 N.m (36-42 in. lbs.).
  3. Connect the pump motor harness.
  4. Connect the harnesses to the CAB and lock the connectors.
  5. Connect battery.
scientia non olet · About LEMON Manuals