Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor Mounting Bolts (4.7L - Mounting Ear) | 41 (55) |
| Compressor Mounting Bolts (4.7L Long Screw) | 30 (40) |
| Compressor Mounting Bolts (4.7L - Rear Screw) | 41 (55) |
| Compressor Mounting Bolts (5.9L) | 30 (40) |
| Compressor Shaft Hex Nut | 11-15 (15-21) |
| Refrigerant Lines At Compressor | 17 (23) |
| Refrigerant Line Manifold-To-Compressor Mounting Screws | 14-19 (19-26) |
| Refrigerant Line At Condenser & Junction Line Jumper | 14-19 (19-26) |
| TVX Retaining Bolts | 13 (18) |
| INCH Lbs. (N.m) | |
| A/C Heater Control-To-Cluster Bezel In Instrument Panel Screws | 14-20 (1.6-2.3) |
| Ambient Temperature Sensor Bracket-To-Radiator Yoke Screw | 50 (5.6) |
| Blend Door Actuator-To-Distribution Housing | 18 (2) |
| Blower Motor Resistor Block-To-HVAC Unit | 20 (2.2) |
| Blower Motor & Blower Wheel Assembly-To-HVAC Housing | 20 (2.2) |
| Condenser Mounting Bolts | 95 (10.7) |
| Filter-Drier Bracket Mounting Screw | 60 (6.8) |
| Front Liquid Line Block Fitting-To-Filter-Drier Inlet Mounting Screw | 119 (13.5) |
| Liquid Line Support Bracket | 51-69 (5.8-7.8) |
| Mode Door Actuator-To-Distribution Housing Screws | 18 (2) |
| Rear Blower Motor & Wheel Mounting Screws | 27 (3) |
| Rear Blower Motor Resistor Bracket-To-Right Rear Corner Of A/C Unit | 20 (2.2) |
| Rear Liquid Line Block Fitting-To-Filter-Drier Outlet Mounting Screw | 119 (13.5) |
| Recirculation Door Actuator-To-Lower Air Intake Housing Screws | 18 (2) |