Engine Controls - Service & Adjustment Specifications: Capacities

CAUTION: If flexible fuel engine oil is not used when using E-85 fuel, engine wear or damage may result.

FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Automatic Transaxle ⁽²⁾

Drain & Refill

⁽³⁾ 4.0 Qts. (3.8L)

Dry Refill

9.7 Qts. (9.2L)

Bidirectional Overrunning Clutch (AWD Models) ⁽²⁾

1.2 Pts. (.6L)

Cooling System ⁽⁴⁾

2.4L

11.4 Qts. (10.8L)

3.3L & 3.8L

With Auxiliary Heater

16.3 Qts. (15.4L)

Without Auxiliary Heater

13.4 Qts. (12.7L)

Crankcase (Includes Filter) ⁽⁵⁾

2.4L

5.0 Qts. (4.7L)

3.3L & 3.8L

4.5 Qts. (4.3L)

Power Steering Fluid ⁽⁶⁾

2.5 Pts. (1.2L)

Power Transfer Unit ⁽⁷⁾

2.4 Pts. (1.15L)

Rear Differential (AWD Models) ⁽⁷⁾

1.5 Pts. (.7L)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Mopar® ATF+4 (Type 9602) is required in the 41TE automatic and T850 manual transaxles. Substitute fluids can introduce transmission problems and/or failure.

⁽³⁾	Estimated service refill.

⁽⁴⁾	Quantity includes heater and coolant recovery tank.

⁽⁵⁾

Only use an API Certified (GF-3) energy conserving engine oil that is certified for gasoline engines (5W-30 or 10W-30). Mopar® provides engine oils, meeting Material Standard MS-6395, that meet or exceed this requirement. On flex-fuel models, use Mopar® Flex-Fuel 5W-30 engine oil or an equivalent that meets Chrysler Standard MS-9214. Equivalent engine oils may be labeled as Multi-Fuel, Variable Fuel, Flexible Fuel, etc. SAE 5W-30 engine oil is preferred for use in Flexible Fuel engines.

⁽⁶⁾	Use only Mopar® ATF+4 Automatic Transmission Fluid (Type MS-9602) in the power steering system. Use of other Mopar® Power Steering Fluids should be avoided to ensure peak performance of the power steering system.

⁽⁷⁾	Use Mopar® Gear and Axle Lubricant (80W-90).