LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2003 >> SRT-4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Computerized Engine Controls >> Powertrain Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module: Installation

  1. Install the PCM and bracket.
  2. Loose install the mounting nut.
  3. Install the mounting bolts to the bottom of the PCM bracket. See Fig 4.
  4. Tighten the mounting nut.
  5. Install the wiring harness clip to the PCM bracket. See Fig 3.
    6. NOTE: The electrical connectors for the PCM are color coded.
  6. Connect the electrical connectors and lock at the PCM. See Fig 2.
  7. Install the air cleaner box. See Fig 1.
  8. Connect the negative battery cable.
Fig 1: Removing & Installing Air Cleaner Box
G00238477Courtesy of DAIMLERCHRYSLER CORP.
Fig 2: Locating PCM Electrical Connectors
G00238478Courtesy of DAIMLERCHRYSLER CORP.
Fig 3: Locating PCM Wiring Harness
G00238479Courtesy of DAIMLERCHRYSLER CORP.
Fig 4: Locating PCM Mounting Bolts
G00238480Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals