Powertrain Control Module: Installation

If the PCM is replaced of usage, update the mileage and vehicle identification number (VIN) in the new PCM. Use the DRBIII(R) scan tool to change the mileage and VIN in the PCM. If this step is not done a Diagnostic Trouble Code (DTC) may be set. Refer to the appropriate Powertrain Diagnostic Manual and the DRBIII(R) scan tool.

1. Install PCM and tighten bolts.
2. Install the three connector to PCM.
3. Install the cleaner assembly, refer to the Engine section for more information.
4. Connect negative battery cable and reprogram radio and clock.
5. Using DRBIII(R) scan tool, program mileage and vehicle identification number (VIN) into PCM. Refer to the DRBIII(R) scan tool and the appropriate Powertrain Diagnostic Manual.