LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Caravan SXT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Front Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Control Module: Installation

NOTE: Front Control Module must be programmed to the correct radio EQ curve using the DRBIII®. This will ensure that the audio system is operating correctly.
  1. Install the Front Control Module (FCM) in the Integrated Power Module (IPM) assembly by pushing the 49-way electrical connector straight in.
  2. Install the FCM retaining screws. Torque the screws to 1 N-m (7 in. lbs).
  3. Rotate the IPM assembly downward to secure in mounting bracket.
  4. Install the battery in the vehicle.
  5. Connect the positive and negative battery cables.
  6. Using the DRB III®, under "FRONT CONTROL MODULE" then "MISC" program the EQ curve of the radio into the Front Control Module. Refer to the appropriate diagnostic procedures.
NOTE: If the vehicle is not equipped with Name Brand Speakers (Infinity, etc.) or Headlamp Washers the DRBIII® must be used to Disable the appropriate relays in the Integrated Power Module Assembly.
scientia non olet · About LEMON Manuals