Removal & Installation
WARNING: This page is about a different car, the 2002 Dodge Grand Caravan, 2002 Dodge Caravan, 2002 Chrysler Voyager, and 2002 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Power Liftgate Module (PLGM) is located in left rear of vehicle. See Figure. Remove "D" pillar trim panel. Disconnect PLGM connectors. Remove screw attaching PLGM to "D" pillar and remove from vehicle.
- To install, reverse removal procedure. Tighten PLGM retaining screw to 14.5 INCH lbs. (2 N.m). Verify power liftgate operation. Cycle liftgate through one open/close cycle so PLGM will relearn cycle.