Vehicle Information Display: Notes
The CMTC/EVIC provides the following functions:
- Compass direction
- Outside temperature
- Elapsed ignition on time
- Distance to empty
- Average fuel economy
- Instantaneous fuel economy
- Trip odometer
- Distance to service
The EVIC will also display the following driver alert messages:
- TURN SIGNAL ON (with vehicle graphic)
- PERFORM SERVICE
- DOOR OPEN (individual or multiple doors, with graphic)
- LOW or HIGH TIRE(S) PRESSURE (when equipped)
- ADJUSTABLE PEDAL DISABLED CRUISE ENGAGED (when equipped)
- ADJUSTABLE PEDAL DISABLED VEHICLE IN REVERSE (when equipped)
An audible chime or chimes will accompany any displayed warning messages. Chime requests with an OPEN message are dependent upon vehicle speed.
The CT/CMTC/EVIC will not display information for any of the screens for which it did not receive the proper PCI bus data. Refer to the symptom list in the Overhead Console for problems related to the CT/CMTC/EVIC.
The CMTC/EVIC receives the following messages from the Body Control Module (BCM):
- Verification of US/Metric status
- VF display dimming brightness and exterior lamp status
- Elapsed Ignition On Time data
- Fuel Economy (Average and Instantaneous)
- Distance to Empty
- Distance to service
- Driver warning messages
The CT/CMTC/EVIC receives the following messages from the Front Control Module (FCM):
- Outside Temperature
The CMTC/EVIC receives the following messages from the Powertrain Control Module (PCM):
- Trip Odometer data
- Vehicle Speed
The EVIC receives the following messages from the Adjustable Pedal System Module (APS):
- APS status warnings
The CT/CMTC/EVIC receives the following messages from the Sentry Key Remote Electronic Entry Module (SKREEM):
- Tire Pressure information
The CMTC/EVIC transmits the following messages to the BCM:
- Status Request: Beep, Reset, US/M Toggle
- Current Display