LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Durango 2WD V8-5.7L VIN D >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Power Seat Control Module >> Service and Repair >> Memory Seat Module Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Memory Seat Module Replacement

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Remove the driver seat cushion/cover (2).
3. Unsnap the memory seat module (4) from the side brackets.
4. Pivot the module upward and disconnect the electrical connectors (1).
5. Pull the module rearward to remove it from the front of the seat frame (3).

INSTALLATION




1. Place the module (4) into position making sure the front snaps into the seat frame (3).
2. Connect the memory seat module harness connectors (1).
3. Pivot the module (4) downward and snap it into place in the side brackets.
4. Install the driver seat cushion/cover (2)
5. Connect the battery negative cable.
6. Verify system and vehicle operation.

scientia non olet · About LEMON Manuals