LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Durango 2WD V8-5.7L VIN D >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Front Control Module (FCM)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Control Module (FCM)

REMOVAL




1. Disconnect the positive and negative battery cables from the battery.
2. Partially remove the Integrated Power Module (IPM) from the engine compartment.
3. Remove the front control module retaining screws.
4. Pull the front control module straight from the IPM.

INSTALLATION




1. Press the Front Control Module (FCM) onto the Integrated Power Module (IPM).
2. Install the mounting fasteners.
3. Install the IPM.
4. Connect the positive and negative battery cables.
scientia non olet · About LEMON Manuals