*Start And Stall Condition: Notes

For the Engine circuit diagram (Refer to SCHEMATICS AND DIAGRAMS ).

For a complete wiring diagram, Refer to  SYSTEM WIRING DIAGRAMS  .

Possible Causes 

1. CURRENT PCM DTCS
2. CURRENT SKIM DTCS
3. THROTTLE POSITION SENSOR SWEEP
4. TP SENSOR NO.1 VOLTAGE GREATER THAN 0.92 VOLTS WITH THROTTLE CLOSED
5. ECT SENSOR
6. OTHER POSSIBLE CAUSES FOR START AND STALL CONDITON
7. FUEL CONTAMINATION