Standard Procedure - Transponder Programming: Notes

Two programmed sentry key transponders are included with the Sentry Key Immobilizer System (SKIS) when it is shipped from the factory. The Sentry Key Immobilizer Module (SKIM) can be programmed to recognize up to six additional transponders, for a total of eight Sentry Keys. The following "Customer Learn" programming procedure for the programming of additional transponders requires access to at least two of the valid Sentry Keys. If two valid Sentry Keys are not available, Sentry Key programming will require the use of a DRB III(R) scan tool and BODY DIAGNOSTIC PROCEDURES - CONCORDE, 300M & INTREPID .