LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2004 >> Viper >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Tank >> Standard Procedure - Fuel Tank Closeout Panel >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Standard Procedure - Fuel Tank Closeout Panel: Notes

NOTE: The Viper does not have a Fuel Tank Close-out Panel. To remove the fuel tank a hole will have to be cut in the trunk pan. Use a suitable cutting tool, to cut the trunk pan.
  1. Take closeout panel and lay against the front of the trunk pan.
  2. Mark the outer edge of the panel.
  3. Measure in 1/2 inch from the outline of the closeout panel.
    CAUTION: Do not protrude more than 1/2 inch thru the panel. The fuel tank is behind this panel.
  4. Cut on the 1/2 inch line marked IN from outline of panel.
  5. Cut clearance notch for fuel pump module as needed.
  6. Place panel in position and drill pop rivet holes.
scientia non olet · About LEMON Manuals