LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2005 >> SRT-4 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Electronic Control Modules (Service Information)) >> Module-Seat Memory >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Seat Memory: Removal

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: REMOVING/INSTALLING MEMORY SEAT MODULE
GC0015859Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the driver seat cushion/cover (2) (Refer to BODY/SEATS/SEAT CUSHION COVER - REMOVAL) .
  3. Pivot the module upward and disconnect the electrical connectors (1).
  4. Unsnap the memory seat module (4) from the side brackets.
  5. Pull the module rearward to remove it from the front of the seat frame (3).
scientia non olet · About LEMON Manuals