LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2006 >> Durango 2WD V8-5.7L VIN 2 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Power Distribution Center
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Distribution Center

REMOVAL
1. Disconnect and isolate the battery negative cable.




2. Depress retaining tabs on the side on the PDC (1).
3. Disconnect electrical harness connectors (2) and remove PDC.

INSTALLATION




1. Connect electrical harness connectors to Power Distribution Center (PDC).
2. Position PDC and engage into the retaining tabs.
3. Connect the battery negative cable.