Module-Steering Column Control: Installation: Assembly

Fig 1: RIGHT - STALK ELECTRICAL CONNECTOR

Courtesy of CHRYSLER LLC

1. Connect the right stalk electrical connector.
   Fig 2: RIGHT - STALK RETAINING SCREW

   Courtesy of CHRYSLER LLC
2. Slide the right stalk into the groove and install the one retaining screw.
   Fig 3: LEFT - STALK ELECTRICAL CONNECTOR

   Courtesy of CHRYSLER LLC
3. Connect the left stalk switch electrical connector.
   Fig 4: Multi-Function Switch Removal/Installation

   Courtesy of CHRYSLER LLC
4. Install the left stalk switch retaining screw.