Installation

INSTALLATION

1. Slide cable into throttle cable bracket and engage retaining tabs.

2. Rotate the throttle cam forward to the wide open position and install speed control cable clasp.

3. Rotate the throttle cam forward to the wide open position and install throttle cable clasp.

4. Install retaining clip that attaches cable to servo.

5. Insert servo studs through holes in the mounting bracket and speed control cable.

6. Install nuts, tighten to 6.7 Nm (60 in.lbs.).

7. Connect vacuum hose to servo.

8. Connect electrical connector.

9. Install servo and bracket and tighten nuts and bolt.

10. Connect negative battery cable.