Installation

INSTALLATION

Transfer speed control cable to replacement speed control servo.

1. Install retaining clip to cable at servo.

2. Install 2 nuts at cable to servo and servo bracket, tighten to 7 Nm (60 ins.lbs.).

3. Connect electrical connector to servo.

4. Connect vacuum line to speed control servo that leads to the battery tray/vacuum reservoir.

5. Install speed control servo and bracket.

6. Install battery tray/vacuum reservoir.

7. Install speed control and throttle cable casing to cable mount bracket.

8. Connect the throttle and speed control cable ends to throttle body.

9. Connect the negative battery cable.