A/C System
A/C SYSTEM SPECIFICATIONS
| Item | Description | Notes |
|---|---|---|
| A/C Compressor | Denso 10S17 - 2.4L/3.3L without rear A/C Denso 10S20 - 3.3L/3.8L with rear A/C |
ND-8 PAG Oil |
| Freeze-up Control | Evaporator temperature sensor | HVAC housing mounted (RS models), Evaporator mounted (RG models) - input to A/C-heater control module |
| Low PSI Control | A/C pressure transducer | Liquid line mounted - input to Powertrain Control Module (PCM) - PCM opens compressor clutch relay below 110 kPa (16 psi) |
| High PSI Control | A/C pressure transducer | Liquid line mounted - input to PCM - PCM opens compressor clutch relay above 3082 kPa (447 psi) |
| - | High Pressure relief valve | A/C Compressor mounted - opens above 3445-4135 kPa (500-600 psi), closes below 2756 kPa (400 psi) |
| R-134a Refrigerant Charge Capacity | RS - Single Unit 0.68 kg (1.5 lbs.) RS - Dual Unit 1.08 kg (2.38 lbs.) RG - Single Unit 0.79 kg (1.74 lbs.) |
Also Refer to the A/C Underhood Specification Label located in the engine compartment |
| A/C Clutch Coil Draw | Denso 10S17 - 3.3 amps Denso 10S20 - 2.2 amps |
@ 12V +/- 0.5V @ 21° C (70° F) |
| A/C Clutch Air Gap | 0.35 - 0.60 mm (0.014 - 0.024 in.) | ... |