Sentry Key Remote Entry Module - Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.

2. Remove the Steering Column Opening Cover.

3. Remove the steering column upper and lower shrouds.

4. Disengage the steering column wire harness from the Sentry Key Remote Entry Module (SKREEM).

5. Remove the one screws securing the SKREEM to the steering column.

6. Rotate the SKREEM upwards and then to the side away from the steering column to slide the SKREEM antenna ring from around the ignition switch lock cylinder housing.

7. Remove the SKREEM from the vehicle.