LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2007 >> Durango 4.7 P, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Emissions System >> Description >> Diagnostic Trouble Codes >> Obtaining DTCS Using A Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Obtaining DTCS Using A Scan Tool

  1. Obtain the applicable Powertrain Diagnostic information.
  2. Obtain a scan tool.
  3. Connect the scan tool to the data link (diagnostic) connector. This connector is located in the passenger compartment; at the lower edge of instrument panel; near the steering column.
  4. Turn the ignition switch on and access the "Read Fault" screen.
  5. Record all the DTCs and "freeze frame" information shown on the scan tool.
  6. To erase DTCs, use the "Erase Trouble Code" data screen on the scan tool.Do not erase any DTCs until problems have been investigated and repairs have been performed. 
scientia non olet · About LEMON Manuals