Diagnostic Test
- ACTIVE DTC NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
NOTE:Check the IOD fuse before continuing. If the fuse is open, check the circuit for a short to ground.
- Turn the ignition on.
- With a scan tool, select View DTCs.
Is the status Active for this DTC?
Yes
- Refer to DIAGNOSIS AND TESTING for diagnostic procedures and for further possible causes.
No
- Perform the CHECKING FOR AN INTERMITTENT DTC Diagnostic Procedure. Refer to CHECKING FOR AN INTERMITTENT DTC .