Diagnostic Test
- ACTIVE DTC
Ignition on, engine not running.
With a scan tool, select View DTCs.
Is the DTC Active at this time?
Yes
- Go To 2.
No
- Refer to the INTERMITTENT CONDITION Diagnostic Procedure.
- CAN C BUS DTCS ALSO ACTIVE
With a scan tool check for DTCs in the TIPM.
Are any CAN C related DTCs Active at this time?
Yes
- Refer to DIAGNOSIS AND TESTING for the appropriate diagnostic procedures.
- Perform BODY VERIFICATION TEST - VER 1 .
No
- Replace and program the Powertrain Control Module per Service Information.
- Perform POWERTRAIN VERIFICATION TEST .