LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2008 >> Viper SRT-10 ACR >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Restraints - Service Information >> Module-Occupant Classification >> Removal >> Module-Occupant Classification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module-Occupant Classification

Fig 1: Removing/Installing Occupant Classification Module
GC0076194Courtesy of CHRYSLER LLC
  1. Open deck lid.
  2. Remove four bolts to battery compartment cover and remove cover.
  3. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.
  4. Remove the seat from vehicle. Refer to REMOVAL .
  5. Disconnect the two electrical connectors (1) from the OCM (2).
  6. Remove the two screws (3) retaining the OCM (2) to the mounting bracket. Pivot the OCM (2) sideways to remove.
scientia non olet · About LEMON Manuals