LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2009 >> Durango Base, 3.7 K >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Final Drive Control Module (FDCM) - Electrical Diagnostics >> DTC Troubleshooting >> C140F-Transfer Case Range Position Sensor Erratic Performance >> Possible Causes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Possible Causes

Possible Causes 
(K504) DRIVETRAIN 5-VOLT SUPPLY CIRCUIT SHORT TO VOLTAGE
(K504) DRIVETRAIN 5-VOLT SUPPLY CIRCUIT HIGH RESISTANCE
(K504) DRIVETRAIN 5-VOLT SUPPLY CIRCUIT SHORT TO GROUND
(T313) MODE SENSOR SIGNAL CIRCUIT SHORT TO VOLTAGE
(T313) MODE SENSOR SIGNAL CIRCUIT HIGH RESISTANCE
(T313) MODE SENSOR SIGNAL CIRCUIT SHORT TO GROUND
(K594) DRIVETRAIN SENSOR RETURN CIRCUIT SHORT TO VOLTAGE
(K594) DRIVETRAIN SENSOR RETURN CIRCUIT HIGH RESISTANCE
TRANSFER CASE ENCODER
FINAL DRIVE CONTROL MODULE (FDCM)
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury. Refer to Electrical - Engine Systems/Battery System - Warning