LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2009 >> Durango Hybrid >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Final Drive Control Module (FDCM) - Electrical Diagnostics >> DTC Troubleshooting >> U0100-Lost Communication With ECM/Pcm >> Possible Causes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Possible Causes

Possible Causes 
CAN C BUS CIRCUITS OPEN OR SHORTED
DTCS RELATED TO BATTERY VOLTAGE, IGNITION, OR VIN MESSAGES
MODULE THAT SET THIS DTC
FRONT CONTROL MODULE (FCM) NOT CONFIGURED CORRECTLY
ECM/PCM POWER AND GROUND
POWERTRAIN CONTROL MODULE (ECM/PCM)
FRONT CONTROL MODULE (FCM)
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury. Refer to Electrical - Engine Systems/Battery System - Warning