LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2009 >> Journey R/T, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 ((Powertrain Control Module (Pcm) - Electrical Diagnostics - 40TES - GPEC)) >> DTC Troubleshooting >> P0736-Gear Ratio Error In Reverse >> Possible Causes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Possible Causes

WARNING: This page is about a different variant/trim than selected.
Possible Causes 
RELATED TRANSMISSION DTCS PRESENT
INPUT OR OUTPUT SPEED SENSOR ERRORS
LOW LINE PRESSURE
FAILED REVERSE OR LR CLUTCH
CUT OR TORN REVERSE OR LR CLUTCH PISTON SEAL
CUT LR ACCUMULATOR PISTON SEAL
STUCK MAIN REGULATOR VALVE
SOLENOID MODULE
BROKEN INPUT SHAFT
FAILED REVERSE CLUTCH HUB
FAILED FRONT PLANETARY GEARSET
FAILED REAR ANNULUS GEAR DRIVE SHELL

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure  .