9013-Driver Seat Belt Switch Circuit Open: Notes

Courtesy of CHRYSLER LLC

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

• When Monitored: 

  While the ignition on and the Occupant Classification Module (ORC) configured for a Driver Seat Belt Switch, the Occupant Restraint Controller (ORC) module checks the switch input current ranges.

• Set Condition: 

  The DTC will be set active if the ORC detects an open or high resistance on the passenger seat belt switch circuits.

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See  DTC-Based Diagnostics/CONTROLLER, Occupant Restraint (ORC) - Standard Procedure