Diagnostic Test
WARNING: This page is about a different car, the 2011 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- MODULE CONFIGURATION
Does the scan tool display B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED?
Yes
- Perform the RE-ZERO OCM SEAT WEIGHT SENSORS diagnostic procedure. Refer to Diagnosis and Testing .
No
- Replace the OCM in accordance with the service information.
- Perform the RE-ZERO OCM SEAT WEIGHT SENSORS. Refer to Standard Procedure .
WARNING:Turn the ignition off disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.
WARNING:If the Occupant Classification Module (OCM) is dropped at any time, it must be replaced. Failure to take the proper precautions could result in accidental airbag deployment and may result in possible serious or fatal injury.