Diagnostic Test

CHECK FOR OTHER TRANSMISSION DTCS
1. With the scan tool, check for other transmission DTCs.
  Are there any TCC, gear ratio and/or speed sensor DTCs present in addition to P0219?
  
  Yes
  - Refer to DTC Based Diagnostics and perform the appropriate diagnostic procedure. If speed sensor DTCs are present, perform their respective tests first.
  No
  - Go To 2.
CHECK FOR ENGINE DTCS
1. With the scan tool, check for engine DTCs.
  Are there any engine DTCs present?
  
  Yes
  - Refer to DTC Based Diagnostics and perform the appropriate diagnostic procedure.
  - Perform CVT VERIFICATION TEST. Refer to Standard Procedure .
  No
  - Go To 3.
CHECK IF DTC RESETS
1. With the scan tool erase transmission DTCs.
2. Test drive the vehicle and try to duplicate the setting conditions.
  Pick the answer that best describes your findings:
  
  DTC resets with a speed sensor DTC
  - Refer to DTC Based Diagnostics and perform the appropriate diagnostic procedure.
  DTC resets without a speed sensor DTC
  - Replace or repair the CV Transmission as necessary in accordance with the Service Information.
  - Perform CVT VERIFICATION TEST. Refer to Standard Procedure .
  No
  - Go To 4.
CHECK THE WIRING AND CONNECTORS
1. The conditions necessary to set this DTC are not present at this time.
2. Using the diagrams as a guide, inspect the wiring and connectors specific to this circuit.
3. Wiggle the wires while checking for shorted and open circuits.
  Were there any problems found?
  
  Yes
  - Repair as necessary.
  - Perform CVT VERIFICATION TEST. Refer to Standard Procedure .
  No
  - Test Complete.