Diagnostic Test

CHECK FOR ENGINE CAM OR CRANK SENSOR DTCS
1. With the scan tool, read transmission DTCs.
  Is the DTC P0717-Input Speed Sensor 1 Circuit No Signal also present?
  
  Yes
  - Go to and perform diagnostics for P0717. Refer to P0717 .
  No
  - Go to 2.
REPAIR INTERNAL TRANSMISSION
1. This DTC indicates an internal transmission problem.
2. Check for the following possible causes but not limited to these:
  - Step motor
  - Shift Valve sticking
  - CVT Belt slipping
  - Hydraulic control circuit including the Valve Body
  Repair
  - Replace or repair the CV Transmission per the Service Information. Refer to Removal .
  - Perform CVT VERIFICATION TEST. Refer to Standard Procedure .