LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2011 >> Challenger SE >> Repair and Diagnosis >> Engine Performance >> System >> 3.6L - Intermittent Condition, Pcm/ECM Reprogramming - Gas, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure >> Standard Procedure >> Pcm/ECM Reprogramming - Gas >> Section 2 - Additional Pcm/TCM Replacement Procedures >> If a GPEC PCM was replaced, perform the following additional steps and/or routines:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If a GPEC PCM was replaced, perform the following additional steps and/or routines:

  1. If the vehicle is equipped with a CVT, verify that the TCM has the latest software calibration available.
  2. PCM Replaced (if equipped with WCM)
  3. Learn ETC
  4. Check PCM Odometer
  5. Check PCM VIN (if NOT equipped with WCM)
  6. TCM Quicklearn (if equipped with EATX)