LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information)) >> MODULE, Engine Control, Diesel >> Standard Procedure >> Pcm/ECM Reprogramming - Diesel >> Pcm/TCM Flash Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pcm/TCM Flash Reprogramming

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

This procedure will need to be done when one or more of the following situations are true:

  1. A vehicle's Powertrain control module (PCM) has been replaced.
  2. A diagnostic trouble code (DTC) is set P1602 - PCM Not Programmed.
  3. An updated calibration or software release is available for either the PCM or TCM ECUs.

This procedure assumes that the StarSCAN® and StarMOBILE® devices are configured to your dealership's network with either a wired or wireless connection. The StarSCAN® and StarMOBILE® must also be running at the latest operating system and software release level. For more help on how to network your StarSCAN® or StarMOBILE® reference the StarSCAN®/StarMOBILE® Quick Start Networking Guide available on 'DealerCONNECT > Service > StarSCAN® and StarMOBILE® Tools > Online Documentation' or at www.dcctools.com, under the Download Center.

scientia non olet · About LEMON Manuals