Programming The Skim

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Read all notes and cautions for programming procedures.

Connect a battery charger to the vehicle.
Connect the StarSCAN®.
CAUTION: If the ECM/PCM and SKREEM/WCM are replaced at the same time, the ECM/PCM MUST be programmed before the SKREEM/WCM.
Select "ECU View".
Select "WCM Wireless Control Module".
Select "Miscellaneous Functions".
Select WCM replaced.
Enter the PIN when prompted.
Verify the correct information.
NOTE: If the ECM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.