LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2011 >> Durango R/T, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 264 (Intermittent Condition, Pre-Diagnostic Troubleshooting Procedure, Pcm/TCM Programming & Powertrain Verification Test) >> Standard Procedure >> Pcm / TCM Programming >> Section 2 - Additional Pcm / TCM Replacement Procedures >> If a CM2100 PCM/ECM (6.7l) was replaced, perform the following additional steps and/or routines:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If a CM2100 PCM/ECM (6.7l) was replaced, perform the following additional steps and/or routines:

WARNING: This page is about a different car, the 2011 RAM Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. PCM/ECM Replaced - if WIN equipped
  2. Check PCM/ECM VIN - if NOT WIN equipped
  3. Enable / Disable Vehicle Features - need to enable features
  4. Injector Quantity Adjustment
  5. Reset Regenerative Filter Timers
  6. Mobile DeSoot - NO Minimum Required Soot Load
scientia non olet · About LEMON Manuals