Module, Integrated Center Stack Screen: Installation: Base

Fig 1: Retainers

Courtesy of CHRYSLER LLC

1. Position the Integrated Center Stack (ICS) screen module into the instrument center bezel.
2. Install the ICS module retainers (1).
   Fig 2: Harness Connectors & Integrated Center Stack (ICS) Screen Module

   Courtesy of CHRYSLER LLC
3. Connect the harness connectors (1 & 2) to the rear of the Integrated Center Stack (ICS) screen module (3).
   Fig 3: 40 - Way Connector

   Courtesy of CHRYSLER LLC
4. Carefully connect the 40 - way connector.
   Fig 4: Instrument Panel Center Bezel

   Courtesy of CHRYSLER LLC
5. Install the instrument panel center bezel (1). Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
6. Connect the negative battery cable.