LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2011 >> Nitro SE, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Intermittent Condition, Pre-Diagnostic Troubleshooting Procedure, Pcm/TCM Programming & Powertrain Verification Test >> Standard Procedure >> Pcm / TCM Programming >> Section 2 - Additional Pcm / TCM Replacement Procedures >> If an EDC16-CP31 (3.0L) was replaced, perform the following additional steps and/or routines:
April 5, 2026: LEMON Manuals is launched! Read the announcement.

If an EDC16-CP31 (3.0L) was replaced, perform the following additional steps and/or routines:

  1. PCM/ECM Replaced - if WIN equipped
  2. Check PCM/ECM VIN - if NOT WIN equipped
  3. Diesel Particulate Filter (Used) Learning
  4. NOx Catalyst (New) Initialization
  5. Injector Quantity Adjustment
  6. IMA Rapid Calibration Test
  7. Fuel Mean Value Adaptation Initialization
  8. Exhaust Throttle Plate Adaptive Learn Position