Diagnostic Test

DTC PRESENT
1. With the scan tool, record and erase DTCs.
2. Cycle the ignition switch from On to Off.
3. Wait 30 seconds.
4. Turn the ignition on.
5. With the scan tool, read DTCs.
  Does the scan tool display POWER LIFTGATE MODULE INTERNAL?
  
  No
  - Operate the power liftgate open and closed several times. With the scan tool, read the DTCs. If this code appears, replace the Power Liftgate Module in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
  Yes
  - Replace the Power Liftgate Module in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .