Module, Door: Removal: Front
WARNING: This page is about a different car, the 2011 Dodge Grand Caravan and 2011 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the trim panel from the inside of the front door. Refer to PANEL, DOOR TRIM, REMOVAL .
- Disconnect the electrical connectors from each of the front door control module (2) connector receptacles.
- Remove the two screws (3) that secure the module to the front door hardware module carrier (1).
- Remove the front door control module from the carrier.