Module, Door: Removal: Rear
WARNING: This page is about a different car, the 2011 Dodge Grand Caravan and 2011 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove the trim panel from the inside of the sliding rear door. Refer to PANEL, DOOR TRIM, REMOVAL .
- Disconnect the electrical connectors (4) from each of the rear door control module (2) connector receptacles.
- Remove the two screws (1) that secure the module to the rear door hardware module carrier (3).
- Remove the rear door control module from the carrier.