LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2012 >> C/V >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Powertrain Control >> Standard Procedure >> Obtaining Diagnostic Trouble Codes >> Obtaining DTC'S Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Obtaining DTC'S Using Scan Tool

WARNING: This page is about a different car, the 2011 Dodge Grand Caravan and 2011 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the scan tool to the data link (diagnostic) connector. This connector is located on the lower left hand side of the steering column.
  2. Turn the ignition switch on and access the Read Fault screen.
  3. Record all the DTC's and freeze frame information shown on the scan tool.
  4. To erase DTC's, use the Erase Trouble Code data screen on the scan tool.Do not erase any DTC's until problems have been investigated and repairs have been performed. 
scientia non olet · About LEMON Manuals