Continuously Variable Transmission (CVT) (Service Information): Specifications: Specifications
CLEARANCES
| DESCRIPTION | SPECIFICATION |
|---|---|
| Forward clutch | 1.2-1.5 mm (0.047-0.059 in.) |
| Total end play | 0.25 - 0.55 mm (0.010 - 0.022 in) |
| Required differential preload | 0.17 to 0.29 mm (0.007 to 0.011 in) |
| Required preload, Reduction gear | 0.13-0.19 mm (0.005-0.0075 in) |
| Reduction Assembly required select shim | Reduction assembly measurement, minus reduction assembly measurement, plus reduction assembly measurement, plus 0.16 mm (0.006 in). |
| Required clearance, Oil pump drive sprocket | 0.10-0.23 mm (0.004-0.009 in.) The select shim is equal to the oil pump drive sprocket measurement one plus the oil pump drive sprocket measurement, two minus 0.16 mm (0.0065 in.). |
| Torque converter installed depth | at least 13 mm |
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| bolts, drive belt assembly - to - transaxle case | 45 | 33 | - |
| Bolt, Detent spring to case | 7 | - | 61 |
| Bolts, oil pump - to - transaxle case | 19 | 14 | 168 |
| Bolt, oil pump - to - transaxle case (outside) | 28 | 20 | 247 |
| Bolts, Valve body assembly - to - case | 8 | - | 70 |
| Nut, Valve body manual lever - to - manual shaft | 22 | 16 | 194 |
| Bolts, Oil strainer to valve body | 8 | - | 70 |
| Bolts, oil pan - to - transaxle case | 8 | - | 70 |
| Bolts, baffle plate | 6 | - | 52 |
| Bolts, oil pump cover | 26 | 19 | 230 |
| Bolts, Bracket oil pump cover - to oil pump | 26 | 19 | 230 |
| Bolts, Baffle plate | 26 | 19 | 230 |
| Bolts, Baffle plate at oil pump driven sprocket | 6 | - | 52 |
| Bolts, Converter housing - to - transaxle case | 45 | 33 | 398 |
| Bolts, TRS | 6 | - | 49 |
| Nut, Shift lever to manual shaft | 17 | 13 | 150 |
| Bolt, Speed input sensor - to - transaxle case | 6 | - | 52 |
| Bolt, Speed output sensor - to - transaxle case | 6 | - | 52 |
| Bolts, Fluid cooler - to - transaxle case | 4 | - | 37 |
| Bolts, transmission bell housing - to - engine | 48 | 35 | - |
| Bolts, Transmission crossmember | 75 | 55 | - |
| Nut, Rear mount through bolt | 75 | 55 | - |
| Bolts, Rear mount to transaxle | 75 | 55 | - |
| Bolts, Torque converter | 48 | 35 | - |
| Bolts, Upper transmission mount | 75 | 55 | - |
| Bolts, PTU support bracket | 68 | 50 | - |
| bolt, Catalytic Converter Support Bracket | 28 | - | 250 |
| Nut, Upper mount through bolt | 75 | 55 | - |
| Bolts, Throttle body support bracket | 11 | - | 105 |
| Nut, Shifter cable | 11 | - | 105 |
| Bolts, Transmission fill tube | 9 | - | 79 |
| Nut, Reduction gear | 250 | 185 | - |
| Bolts, Shifter - to - floor | 70 | 52 | - |
| Bolts, Bracket to Valve Body | 8 | 70 | - |