Diagnostic Test
- REPLACE THE TOTALLY INTEGRATED POWER MODULE IF DTC IS ACTIVE
- With the scan tool, read the active TIPM DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace and program the Totally Integrated Power Module in accordance with the Service Information.
- Refer to STANDARD PROCEDURE and perform the BODY VERIFICATION TEST.
No
- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.
- With the scan tool, read the active TIPM DTCs.