Step-By-Step Instructions
Check PCM Odometer
From the "Home" screen, select "ECU View".
- Select "PCM"
- Select "Misc. Functions"
- Select "Check PCM Odometer" and follow the on screen instructions.
- When complete, select "Finish".
Check PCM VIN
From the "Home" screen, select "ECU View"
- Select "PCM"
- Select "Misc. Functions"
- Select "Check PCM VIN" and follow the on screen instructions.
- When complete, select "Finish"
Initialize CVT
From the "Home" screen, select "ECU View"
- Select "TCM"
- Select "Misc. Functions"
- Select "Initialize CVT" and follow the on screen instructions.
- When complete, select "Finish"
Initialize EGS
From the "Home" screen, select "ECU View"
- Select "TCM"
- Select "Misc. Functions"
- Select "Initialize EGS" and follow the on screen instructions.
- When complete, select "Finish"
Learn ETC
From the "Home" screen, select "ECU View"
- Select "PCM"
- Select "Misc. Functions"
- Select "Learn ETC" and follow the on screen instructions.
- When complete, select "Finish"
PCM Replaced
The vehicle PIN (Personal Identification Number) will be required to complete the routine. This information may be obtained in three ways:
- The original selling invoice
- DealerCONNECT > Parts > Key Codes
- Contacting the District Manager.
From the "Home" screen, select "ECU View"
- Select "WCM"
- Select "Misc. Functions"
- Select "PCM Replaced" and follow the on screen instructions.
- When complete, select "Finish"
Quicklearn
From the "Home" screen, select "ECU View"
- Select "PCM"
- Select "Misc. Functions"
- Select "Quicklearn" and follow the on screen instructions.
- When complete, select "Finish"
Update CVT TCM
From the "Home" screen:
- Select "ECU View"
- Select "TCM"
- Select "More Options"
- Select "ECU Flash"
- Select "Browse for New File" and follow the on screen instructions.
- Highlight the appropriate calibration.
- Select "Download to Scantool"
- Once the download is complete, select "Close" and then "Back"
- Highlight the listed calibration, select "Update Controller" and follow the on screen instructions.
- When the TCM update is complete, select "OK"
- Verify that the part number at the top of the "Flash TCM" screen has updated to the latest level.